C-DT25-GD2 double hole single pass 25 square Rail Terminals
Rail terminals are developed for many pain points of Rail terminals.Aiming to solve the problem of fracturing pipes and wires and poor crimping due to irregularly old crimping method, which also caused some drawbacks like unreliable connection and high temperature rise. In addition, there is a potential safety hazard when terminals are connected with rails. It is easy to fracture wires and lead to the electric leakage, if terminals are affected by shocking or dropped from high altitude that strike on stones.
This series of pressure-free self-locking connectors are equipped with springs which play a role of shockproof, keeping away from the interface can increase the stability and safety of the connection. The purpose of the wire entrance is horn-shaped to facilitate the access to the wire and the installation. It has the characteristics of low contact surface resistance and low temperature rise as well. in addition，it can be used in irregular While crimping, the reliability of the connection is guaranteed.
1.At the same time, our company has added a series of silicone sleeves for high-current maintenance in C-DT25-GD2 double hole single pass 25 square Rail terminals.In order to avoid any safety hazards, our company added silicone sleeves on this type of terminals if it is adopted on large current maintenance.
Advantages of C-DT25-GD2 double hole single pass 25 square:
Low temperature rise:
The contact area increases, the contact resistance decreases, and the temperature rise is low.
No insulation tape:
Press the old terminal to connect to the connection point and then wrap it with insulating tape.There are some safety risks that it is easily to aging and fall off after time passes. making it difficult to play the role of waterproof and anti-corrosion. There are security risks
Old-fashioned terminals have to be crimped with hydraulic clamps. not only expensive and heavy， but also inconvenient for carrying
No need to crimp and no need to wrap insulation tape. Additionally, it is also time-saving and efficiency that connection time of terminals only takes a fifth of time than before.
the stripping length is about 1/3-1/2 of the old connection method.
Shock absorption and shock resistance: In the process of maintenance, it can resist the shock caused by vibration and overcome the situation of wire fracture caused by vertical fall, so as to guarantee the personal safety of maintainers.
It waterproof, acid resistant, anti-oxidation, anti-corrosion,and V1 flame retardant.
Remarks: Can be customized according to Customers’ needs
Remarks: C-DT25-GD2 double hole single pass 25 square can be customized according to the model required by the customer
Rail transit connection product parameters (with stainless steel outer spring) Dimensions unit: mm
Rail transit connection product parameters (with transparent silicone sheath) Dimensions unit: mm
Hot Tags: C-DT25-GD2 zulo bikoitzeko pase bakuna 25 karratu, fabrikatzaileak, hornitzaileak, fabrika, pertsonalizatua, Txina, Txinan egina, FOB Shenzhen, deskontua, prezioa, prezioen zerrenda, aurrekontua, CE, berriena, kalitatea, aurreratua, iraunkorra, 5 urte Bermea, klasea, patentatua, berrikuntza